Bangle size chart and finder
Measure around your hand, or across a bangle that fits, in cm. The bangle size calculator gives your size, like 2.4 or 2.6, and the full chart. Free, no login.
By Sunny KumarUpdated
Example18.5 cm around your hand
Bangle size 2.6
- Also written
- 2-6
- Inside width
- 60.3 mm · 2 6/16 in
- Around
- 189.5 mm · 7.46 in
Bangle size chart
Each size is the inside width of the bangle in inches and sixteenths: 2.4 is 2 4/16 inches, or 5.7 cm across the inside. Shops also write it 2-4.
In Hindi the quarter sizes go by their inches: 2.4 is 2¼ inches (sawa do), 2.8 is 2½ (dhai) and 2.12 is 2¾ (paune teen).
| Size | Also written | Inside width | Around | |||
|---|---|---|---|---|---|---|
| in | mm | cm | in | mm | ||
| 2.2 | 2-2 | 2.125 | 54.0 | 5.4 | 6.68 | 169.6 |
| 2.4 | 2-4 | 2.250 | 57.2 | 5.7 | 7.07 | 179.5 |
| 2.6 | 2-6 | 2.375 | 60.3 | 6.0 | 7.46 | 189.5 |
| 2.8 | 2-8 | 2.500 | 63.5 | 6.4 | 7.85 | 199.5 |
| 2.10 | 2-10 | 2.625 | 66.7 | 6.7 | 8.25 | 209.5 |
| 2.12 | 2-12 | 2.750 | 69.8 | 7.0 | 8.64 | 219.4 |
| 2.14 | 2-14 | 2.875 | 73.0 | 7.3 | 9.03 | 229.4 |
| 3.0 | 3-0 | 3.000 | 76.2 | 7.6 | 9.42 | 239.4 |
How to measure bangle size at home: two ways
Around your hand
- 1. Tuck your thumb into your palm, as if putting a bangle on.
- 2. Wrap a tape or thread around the knuckles, thumb knuckle included.
- 3. Read the length in cm and pick “Around my hand”.
Across a bangle that fits
- 1. Lay the bangle flat on a table.
- 2. Measure straight across the inside, through the middle, leaving out the metal.
- 3. Read the width in cm and pick “Across a bangle”.
How to use it
- Measure around your hand, or across a bangle that fits, in cm.
- Type the number and pick what you measured.
- Tap “Find size” to see your bangle size, with its width and length around.
How do I know my bangle size?
Measure around your hand with the thumb tucked in, then pick the smallest size that is at least that long around. 18.5 cm around your hand is size 2.6.
A bangle has no clasp, so it has to go over the widest part of your hand.
What do bangle sizes like 2.4 and 2.6 mean?
They are the inside width in inches and sixteenths: 2.4 is 2 and 4/16 inches, and 2.6 is 2 and 6/16 inches.
So 2.10 is bigger than 2.8: ten sixteenths against eight. Each step adds about 3.2 mm across.
Should I measure my wrist or my hand?
Your hand. A round bangle has to slide over the knuckles, so the hand decides the size, not the wrist.
A wrist measure is for a kada or bracelet that opens with a clasp or screw.
Questions people ask
Which is bigger, 2.10 or 2.8?
2.10. The number after the dot counts sixteenths of an inch, so 2.10 is 10/16 and 2.8 is 8/16. Across, that is 66.7 mm against 63.5 mm.
Which size do most women wear?
It depends on the hand, not the wrist, so measure. The finder gives the smallest size that will slide over your hand.
Is there a printable bangle sizer?
Not here. A printed sizer changes size with the printer's settings, so a tape or a thread and a ruler give a truer number.
What if I am between two sizes?
Try both at the shop. A bangle that is too tight won't go on; one that is too loose slips off easily.
Is the bangle size finder free?
Yes. There is no login and no limit.
How we made this
Bangle sizes are the inside width in inches and sixteenths, worked out to mm here (1 inch is 25.4 mm). From your hand, we pick the smallest bangle that is at least as long around as your hand. Sources: BlueStone: bangle sizes are inches and sixteenths of the inside diameter; Varniya: measuring a hand for a bangle.